Search for: All records

We study the effects of electron irradiation on suspended graphene monolayers and graphene supported on SiO2 substrates in the range 5.0 × 1015–4.3 × 1017 electrons/cm2. The suspended graphene monolayers are exfoliated over SiO2 substrates containing micrometer-sized holes, with graphene completely covering the hole, and are referred to as graphene drums. The irradiation was performed using a scanning electron microscope at 20–25 keV electron energy. We observe a two-stage behavior for the ID/IG, ID′/IG, and ID/ID′ ratios as a function of the average distance between defects, LD, where ID, IG, and ID′ are the intensities of the Raman D, G, and D′ peaks, respectively. Good fits to the dependence of the ratios on LD are obtained using the local activation model equation. The fits are used to characterize the defects at high defect densities. We also carried out annealing studies of samples irradiated to the first stage and used an Arrhenius plot to measure activation energies for defect healing, Ea. We measured Ea = 0.90 eV for the graphene drums, consistent with the hydroxyl groups; for supported graphene, we measured Ea = 0.36 eV, consistent with hydrogen adsorbates. We also studied the surface of the drums using atomic force microscopy and found no observable holes after irradiation and annealing. Our results show that the local activation model is useful in characterizing the defects in graphene drums. 

Encapsulating Cs4PbBr6 quantum dots in silicon nano-sheets not only stabilizes the halide perovskite, but also takes advantage of the nano-sheet for a compatible integration with the traditional silicon semiconductor. Here, we report the preparation of un-passivated Cs4PbBr6 ellipsoidal nanocrystals and pseudo-spherical quantum dots in silicon nano-sheets and their enhanced photoluminescence (PL). For a sample with low concentrations of quantum dots in silicon nano-sheets, the emission from Cs4PbBr6 pseudo-spherical quantum dots is quenched and is dominated with Pb2+ ion/silicene emission, which is very stable during the whole measurement period. For a high concentration of Cs4PbBr6 ellipsoidal nanocrystals in silicon nano-sheets, we have observed Förster resonance energy transfer with up to 87% efficiency through the oscillation of two PL peaks when UV excitation switches between on and off, using recorded video and PL lifetime measurements. In an area of a non-uniform sample containing both ellipsoidal nanocrystals and pseudo-spherical quantum dots, where Pb2+ ion/silicene emissions, broadband emissions from quantum dots, and bandgap edge emissions (515 nm) appear, the 515 nm peak intensity increases five times over 30 min of UV excitation, probably due to a photon recycling effect. This irradiated sample has been stable for one year of ambient storage. Cs4PbBr6 quantum dots encapsulated in silicon nano-sheets can lead to applications of halide perovskite light emitting diodes (PeLEDs) and integration with traditional semiconductor materials. 

Silicon nanotubes (Si NTs) have a unique structure among the silicon nanostructure family, which is useful for diverse applications ranging from therapeutics to lithium storage/recycling. Their well-defined structure and high surface area make them ideal for sensing applications. In this work, we demonstrate the formation of Au nanoparticles (NPs) functionalized with 4-Mercaptophenylboronic acid (MPBA) on porous Si NTs (pSi NTs) fabricated using ZnO nanowires as a template. The system was characterized, and the proposed structure was confirmed using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Varying glucose concentrations in phosphate-buffered saline (PBS) (0.5–80 mM) were introduced to the Si NT nanocomposite system. The glucose is detectable at low concentrations utilizing surface-enhanced Raman spectroscopy (SERS), which shows a concentration-dependent peak shift in the benzene ring breathing mode (~1071 cm−1) of MPBA. Complementing these measurements are simulations of the Raman hot spots associated with plasmonic enhancement of the Au NPs using COMSOL. This biocompatible system is envisioned to have applications in nanomedicine and microfluidic devices for real-time, non-invasive glucose sensing.